- Wireless speakers arenât as loud as their wired counterparts.
- Wireless latency can lead to audio fluctuations.
- Any sort of electromagnetic interference can disrupt the signal.
- Wireless speakers can take up network resources from your home router and are generally more expensive than a wired set.
- There is too much variance in how they connect wirelessly.
Are you looking for reasons to avoid new wireless speakers? The modern-day is built around the sake of convenience, and wireless speakers provide a tidy way to get better sound. However, they aren’t without their faults. While wired speakers can be a massive hassle when it comes to setup, they might prove to be the better choice overall.
What Are Wireless Speakers?
Wireless speakers are a great way of getting a cable-free connection from your TV to the rest of your room. Users looking to get a tidier setup would do well to look into a set of wireless speakers for their home theater setup.
Why You’d Use Them
The best use case for wireless speakers is avoiding the snarl of cabling that can happen with normal speakers. Users who are after a visually neater home theater setup are more likely to learn about a wireless connection. You still get access to great audio, just without the hassle of routing cabling and making sure everything has its own proper place.
Reason #1: Latency Can Lead to Audio Fluctuations
Anything wireless has a degree of latency present. Now, you can minimize this to some extent but, depending on the distance between the base receiver and your speakers, it is still present. If you’re concerned about the video and audio getting out of sync, this might be one of the best reasons to avoid new wireless speakers.
You can do quite a few workarounds to try to keep things functioning flawlessly. However, eventually, you’ll notice the latency and that the audio is a step or two behind the action on screen. If you have a larger speaker setup, this could be quite distracting for your viewing.
Reason #2: They Aren’t Nearly as Loud
Wireless speakers can’t pump out the same level of volume as their wired counterparts. Wired speakers generally have more power on tap and a hard connection from an amplifier or receiver. As such, they’ve got plenty of power to deliver crystal-clear audio.
If you’re looking for something to fill a room, then this might be one of the biggest reasons to avoid new wireless speakers. There is also the inherent risk of the wireless speakers being prone to poor distortion at higher levels.
Reason #3: Interference Can Disrupt the Signal
One of the bigger risks you’ll carry with any wireless transmission is signal disruption. This can come from a variety of different sources. Household appliances like microwave ovens are a common way people will see their wireless service disrupted. This same principle holds true for wireless speakers.
You run a genuine risk of some errant household appliance going off and losing sound access entirely. This isn’t a risk posed to wired speakers. It’s a real reason to avoid new wireless speakers if you want uninterrupted service.
Reason #4: There Is Too Much Variance in Broadcast Technology
Wireless speakers don’t have one genuine standard to hold up as the norm. You have Bluetooth, infrared, and Wi-Fi, among other technologies in use. Now, of these, infrared is arguably the best. It operates at a different frequency compared to other household appliances and operates with line of sight.
Bluetooth and Wi-Fi connections are more convenient and don’t rely on a line of sight to function. However, they are prone to signal disruption, as previously discussed. You don’t want to play a guessing game to get the ideal set of wireless speakers for your home.
Reason #5: Some Can Take Up Wireless Bandwidth
Every device you use on your wireless network takes up bandwidth. There are a few considerations when you’re looking at connecting all your devices online. Now, most devices in a household will do just fine on a wireless connection. However, if you’re stuck on a slower internet connection or you’re using an older router, you’ll feel a squeeze.
Wireless routers are only rated for so much bandwidth, and wireless speakers will be there right along with your TV, streaming devices, and computers. If you’d like to keep room for the rest of your devices, this is another reason to avoid new wireless speakers.
Reason #6: The Cost Is Generally Higher
The last of the best reasons to avoid new wireless speakers is one of just pure pragmatism. Wireless speakers will generally cost more than their wired counterparts. If you’re looking to put together a good home theater system without breaking the bank, your dollar goes a lot further with wired speakers.
Yeah, it’ll be more of a pain in the neck to get everything configured and get the wires out of the way. However, your savings can be put towards peripherals like a subwoofer or cable ties to keep everything out of the way.
Alternatives to Wireless Speakers
Here are three of our favorite alternatives to wireless speakers.
- P2P bracing, 150W amplifier
- Q 3010i bookshelf speakers deliver deep bass
- Q 3090Ci center channel speaker delivers crisp dialogue
- Q 3060S subwoofer speaker delivers an acoustic double bass
If you’re looking for the best overall quality for a sound system, wired speakers are the way to go. The Q Acoustics 3000i 5.1 is a full-fledged surround sound setup utilizing bookshelf speakers. You’ve got an active subwoofer for clear and present bass.
The power of a wired system can’t be understated, and you’ve got plenty on tap with the 3000i. The system itself uses 150 watts from the wall just for the subwoofer. That doesn’t even get to the draw from the bookshelf speakers. Q Acoustics does stellar work on wired systems — you won’t be disappointed.
If you’re after great sound but want a minimal footprint, wired soundbars are the way to go. You’ve got fewer cables to place around, thanks to the soundbar acting as the primary driver. The Vizio M-Series 5.1.2 soundbar gets you access to Dolby Atmos with minimal fuss.
It does come with a pair of rear-firing speakers, but you also have a wireless subwoofer that should aid with placement. Vizio’s soundbar is a great alternative if you don’t have the space for a full surround sound system, but still want the same level of sound quality.
- Wireless Dolby Atmos, True 11.1.4 Sound, and DTS:X
- 11 channels, 1 subwoofer, and 4 upfiring channels
- SpaceFit Sound+ (room-filling sound)
- AirPlay 2 and Alexa built-in
- Adaptive Sound delivers dynamically optimized audio with enhanced voice clarity
Wireless soundbars present a great midpoint between a wired soundbar and a wireless speaker set. You’ve got maybe two devices in total when counting the soundbar and subwoofer. There is still a clear and present sound, with plenty of power on tap.
You’ve got far less cabling, even with a device like the Samsung HW-Q990B/ZA. This 11.1.4 soundbar is one of the best on the market and comes with full support for Dolby Atmos and DTS:X. If you want the best, you’re looking at it.
Wireless speakers are a great choice for users who can deal with their shortcomings. If you want something that just works without potential issues, you might want to look at some of the alternatives on the market. However, with proper placement and room design, you could make great use of a wireless speaker set. It just depends on if you want to put in the legwork to get things just right.
|Reasons to Avoid New Wireless Speakers
|1. Wireless latency can lead to audio fluctuations.
|2. They aren’t as loud as their wired counterparts.
|3. Any sort of electromagnetic interference can disrupt the signal.
|4. There is too much variance in how they connect wirelessly.
|5. They can take up network resources from your home router.
|6. Wireless speakers are generally more expensive than a wired set.
The image featured at the top of this post is ©Niks Evalds/Shutterstock.com.