- The RCA universal remote is relatively easy to program and can be used to control all the components of a home theater system.
- The article provides a table of RCA universal remote codes for various television manufacturers.
- There are two methods for programming the RCA universal remote: manual and automatic.
- The manual method requires entering specific codes for the TV manufacturer, while the automatic method searches for the correct code.
- After programming the remote, users can test its functionality by controlling the TV’s power, volume, and channels.
Do you need help programming your RCA universal remote? A universal remote is a great way to unify controls for all the components of your home theater system. Going through the process of actually programming the remote to function with your TV and other devices can be a bit confusing at times. You’ll often come across different procedures, as every remote manufacturer has a different method.
The RCA universal remote is thankfully relatively easy to get up and running. Today’s guide will go over codes for common television manufacturers as well as how to program the remote. If you’ve been struggling with the instructions or can’t locate good codes for your components, you’re in the right place.
RCA Universal Remote Codes for Televisions
|Code for RCA Universal Remote
|0812, 1675, 0702, 1935
|1365, 1589, 2014, 2087, 2479
|1634, 2306, 2315, 2344, 2345, 2348
|1864, 0451, 0463, 0178, 0171, 1661, 1394, 1665, 1963
|1547, 1447, 0000, 0051, 0451, 0178
|0748, 1660, 2098, 2355
|1423, 1564, 0463, 0171, 1660, 1710, 1892, 1963, 2049
|0463, 0053, 1253, 1601, 1774, 2264
|1423, 1447, 0017, 0178, 2358, 2424
|1454, 1866, 1755, 0054, 0051, 0171, 0802, 1365, 1856, 1963
|1250, 0093, 0150, 0178
|1480, 0250, 1457, 0051, 1291, 2264
|1454, 1866, 0054, 1744, 1856, 2372, 2374
|1547, 1447, 0000, 0051, 0093, 1661, 1781, 2187, 2247, 2434
|0812, 0060, 0702, 0178, 1060, 2051
|1524, 0156, 0060, 1291, 1935, 2006
RCA Universal Remote Programming: Manual Method
Manually programming your RCA universal remote can be the faster method of the two. However, it does require a degree of legwork on your end to get the ideal level of functionality. Make sure you double-check the codes above as well as any included literature with your universal remote.
Before you get started programming your RCA universal remote, you’ll want to pick out the codes you need for your TV. Codes aren’t universal between manufacturers, and you’ll find there are a slew of different codes for each device. As such, make sure you write down a few ahead of time to test while programming your remote.
This will save you time from flipping through the manual or checking our table above. If you’d rather do something a little more hands-off for the programming, you always have the option of using the automatic method.
Power On TV
The first real step in programming your RCA universal remote just requires you to power your television on. You can use the power button on the device itself or use its intended remote for this step. It doesn’t do much good trying to program the remote without some degree of visual feedback.
Having the television on helps you see that you have achieved the desired effect of seeing your universal remote communicate with any of the components in your home theater setup.
Hold Down TV Button
You can swap this step out with whatever other components you might be programming. Before you get ready to roll with programming your RCA universal remote, you’ll want to press and hold down the TV button.
This differs from the automatic method as you’ll need to keep the TV button pressed down during most of the process itself.
You’ll want to enter the four-digit code for your TV manufacturer while keeping the TV button depressed. Successful entry of the right code will result in the remote’s power indicator staying on. If you instead get a blinking light four times in a row, you’ll have to try another code.
The blinking light signifies a failed entry or an unrecognized code. As every manufacturer has multiple codes, this can be a bit daunting unless you know the specific one for your television or other components. Cycle through the available codes for your RCA universal remote until the power indicator light remains on.
Release TV Button
Upon successful entry of a code, and with the power indicator light visible, you can release the TV button. The power indicator light staying on is telling you that your RCA universal remote has stored the correct code for your television or other components.
Releasing the device button allows your universal remote to exit programming mode and go back to functioning as a regular remote. You should have the TV and universal remote successfully paired at this point.
Power Down TV
As a test, you’ll just want to power down the television. If your TV has successfully turned off, you’re in luck as far as programming your RCA universal remote. Everything after is just going to be making sure the functions of the remote are properly corresponding to their equivalent functions on the television or other devices.
Using your RCA universal remote, power your TV back on. From here you can test functions like selecting the input, raising and lowering the volume, changing channels, and so forth. You can even just jump right to enjoying your television or going about programming the rest of the devices in your home theater system.
RCA Universal Remote Programming: Automatic Method
The automatic method of programming your RCA universal remote can be a simpler process as a whole. You don’t have to prepare a list of codes and run through them one by one until you hit a code that works. However, do keep in mind there is a specific procedure for programming the remote. Failure to follow these steps could result in your remote not working as intended.
Power On TV
As with the manual method of programming your RCA universal remote, you’ll start with powering your TV on. You want some degree of visual feedback when programming your remote, so having the TV on is a great way to get started. It also gives you an easy way to verify and test functionality during the programming process as a whole.
Hold Down TV Button
This is another familiar step, but a necessary one. You’ll want to start the programming process by holding your TV button. The power indicator should emit a solid light during this step, letting you know that the remote is ready to receive codes or automatically search for them.
Press TV and Power Buttons
You’ll want to keep the TV button depressed during this step while also pressing the power button. It may not seem evident at first glance, but this step is going to run through all possible codes on the remote until the right one is found. With any luck, your RCA universal remote’s power indicator should turn on and off during this step. Once it has powered on and off, you can let go of both buttons.
If it doesn’t do so, you’ll want to start over. Make sure you keep the television button held during the entire process.
Press Play Button in Intervals
You’re now officially in the programming phase for your RCA universal remote. Finding the correct code is a matter of pressing the play button on the remote for five seconds. It might not work automatically, so you’ll have to get into a cycle of holding the play button for five seconds, releasing it, and starting all over again.
When your universal remote has successfully found the right code, it should automatically power the television off.
Press Reverse Button
You’re just about done with the automatic process of programming your RCA universal remote. This step requires pressing the reverse button on your remote until the television powers back on. You’ll want to keep the button held until your television is powered back on, which might take a few seconds. Once it is powered on, you can move to the next step.
Hold Down Stop Button
To store the code permanently, you’ll want to press and hold the stop button for five seconds or so. This will keep the code and programming for your TV and remote in sync. You are technically done at this step and continue to program the remote with the other components in your home theater setup.
After successfully programming your remote, make sure you test functionality by changing the channel, raising the volume, or simply powering the TV off.
Programming the RCA universal remote isn’t nearly as daunting as it first appears. While the slew of codes available for TV manufacturers can be overwhelming, the automatic process as a whole does simplify it.
If you do run into issues, you can always start the entire process over again. Make sure your TV is plugged into a stable power source and you’ve got a fresh set of batteries in your remote. With any luck, you’re ready to get back to watching your favorite shows and movies.
The image featured at the top of this post is ©Andrey_Popov/Shutterstock.com.