Key Points
- You can find universal remote codes for an LG TV based on the length of the code and the brand of the remote.
- There are 3-digit, 4-digit, and 5-digit codes available for programming LG TVs with universal remotes.
- Programming your LG TV with a universal remote involves entering a code or using an automatic code search function.
- If you encounter issues, troubleshooting steps are available to help resolve the problem.
One way or another, you’ve somehow lost the remote that came with your LG TV. But this isn’t the end of the world, because you’ve purchased a universal remote to replace it. It turned out to be cheaper too, which is a bonus. And now you don’t have to waste precious time searching for the right remote. But now you’re faced with the task of setting up your remote to work with your TV. While this can involve some trial and error, we’re here to guide you through the process and make it as painless as possible. Here, you’ll find universal remote codes for programming your LG TV, as well as some useful tips for setup.
LG TV Universal Remote Codes
Every TV model has a unique set of codes that work with it. The same goes for the different types of universal remotes. Therefore, there are a lot of potential codes to contend with. Fortunately, there are a few ways to simplify the process. Every remote only works with a specific length of code. You can begin by testing your remote to see what code length it’s compatible with (have a look at the section below for some help with this). Then, find your remote brand below to see the codes associated with it. This should narrow down your search.
3-Digit Codes
| Remote | 3-Digit Codes |
|---|---|
| RCA | 004, 005, 082 |
| Philips | 083 |
| GE | 004, 005, 009, 050, 081, 134, 155 |
| Spectrum | 004, 023, 031, 053, 068, 073, 086, 090, 102, 106, 107, 108, 112, 113, 116, 127, 143, 233, 236, 247, 250, 268, 284, 363, 387, 569, 598, 648, 698, 705, 741 |
4-Digit Codes
| Remote | 4-Digit Codes |
|---|---|
| RCA | 0017, 0178, 0700, 0706, 0856, 0885, 1005, 1013, 1078, 1082, 1083, 1089, 1178, 1196, 1204, 1205, 1215, 1265, 1325, 1423, 1447, 1756, 1768, 1993, 2049, 2358, 2424, 2434, 2731, 3183, 3397, 4398 |
| Philips | 0001, 0002, 0015, 0036, 0064, 0102, 0131, 0244, 0251, 0274, 0388, 0397, 0458, 0502, 0583, 0606, 0611, 0709, 0741, 0761, 0931, 1181, 1221, 1471, 1501, 1718, 1741, 1911, 2891, 3001, 3021, 3091, 3221, 3281, 3311, 3811, 4731, 5271, 5501, 5511, 6021, 6171 |
| GE | 0001, 0004, 0005, 0009, 0050, 0081, 0131, 0134, 0155, 0251, 0611, 0761, 0931, 1181, 1221, 1471, 1501, 1741, 1911, 2891, 3001, 3021, 3091, 3221, 3281, 3311, 3811, 4731, 5002, 5006, 5010, 5018, 5020, 5021, 5052, 5106, 5107, 5128, 5139, 5271, 5483, 5501, 5511, 6021, 6171 |
| One For All | 0009, 0017, 0030, 0037, 0039, 0056, 0108, 0109, 0178, 0361, 0556, 0606, 0644, 0698, 0700, 0706, 0714, 0715, 0856, 0876, 0885, 1037, 1149, 1178, 1232, 1265, 1295, 1305, 1319, 1325, 1423, 1539, 1576, 1637, 1652, 1663, 1664, 1667, 1681, 1721, 1753, 1756, 1768, 1840, 1842, 1859, 1860, 1891, 1993, 2049, 2057, 2065, 2182, 2358, 2359, 2424, 2434, 2569, 2612, 2731, 2741, 2834, 2864, 2867, 3133, 3183, 3397, 3398, 3401, 3571, 3941, 3998, 4017, 4086, 4119, 4397, 4398, 4787, 5168 |
| Comcast | 0017, 0056, 0178, 1756 |
| Spectrum | 0001, 0017, 0021, 0030, 0061, 0081, 0101, 0178, 0201, 0211, 0231, 0281, 0706, 0856, 0885, 1005, 1013, 1018, 1035, 1079, 1098, 1178, 1225, 1228, 1234, 1264, 1307, 1314, 1318, 1340, 1373, 1423, 1753, 1756, 1768, 2049, 2360, 2434, 2511, 2801, 3094, 3241, 4241 |
5-Digit Codes
| Remote | 5-Digit Codes |
|---|---|
| RCA | 10017, 10178, 10856, 10885, 11265, 11314, 11423, 11447, 11756, 11758, 12049, 12271, 12358, 12424, 12434, 12731, 13183, 14398 |
| Philips | 10005, 10030, 10261, 11764, 11818, 12751, 12830, 12846, 13134. 13169. 13365. 13558. 14972. 15159. 15526. 15757. 15928. 17415. 17921. 18753. 18924. 19114. 19326. 19332. 19424. 19851 |
| One For All | 10178, 10856, 10885, 11265, 11423, 11756, 12049, 12358, 12424, 12434 |
| Comcast | 10003, 10016, 10017, 10032, 10037, 10178, 10386, 10442 10700 10706 10842 10856 10885 11032 11178 11265 11314 11423 11454 11530 11637 11756 11758 11934 11993 12049 12246 12248 12253 12268 12269 12270 12271 12284 12434 12731 |
| DirecTV | 10017, 10030, 10056, 10178, 10700, 10706, 10829, 10856, 10885, 11178, 11265, 11325, 11423, 11447, 11756, 11758, 11993, 12049, 12358, 12360, 12424, 12434, 12612, 12731, 12834, 12864, 13941 |
| Spectrum | 10017 10178 10442 10885 11314 11423 11447 11756 12049 12360 12434 12864 12867 13094 14398 |
Programming Your LG TV: Step-By-Step Guide
You may have to try several codes to get your remote working, but overall, the method isn’t too difficult. See the steps below to program your remote.
Step 1: Turn On TV and Enter Setup Mode
To begin, you’ll need to turn on your TV manually without using your remote. Next, the remote needs to be put into setup mode. The way to do this can differ depending on which brand of remote you have. Generally, you’ll have one of the following buttons at the top of your remote:
- Code Search (RCA)
- Setup (GE, Philips)
- Magic (One For All)
If you have one of these, press it and hold until the remote’s LED lights up. Otherwise, you may have a “Device” or “Mode” button with an associated light for the “TV” setting. Press this until TV is lit. However, it’s possible you don’t have this and simply have a TV button instead. Press this until the light comes on.
©Raimond Spekking / CC BY-SA 4.0 – License
Step 2: Enter a Code
It’s now time to enter a code using your remote. You should keep the TV button held down while doing this, if you have one. Once you’ve finished entering the code, a couple of things can happen. If the code is valid, then the LED on your remote will usually flash two or three times and then turn off. In some cases, it’ll turn off without flashing at all, and the TV may turn off too. But if the code isn’t correct, then the remote will generally flash one time or up to five times and stay illuminated. This prompts you to try a different code.
Programming Your LG TV Without Entering Codes
If you can’t find a code that works or think it’s simply too much hassle, you may be in luck. There may be another way to program your remote, but this depends on the brand. Some will have apps you can download to assist with this, such as One For All remotes. Many remotes also have an automatic code search function, which you can use to search for codes without having to enter them manually.
Check out the steps below to see how to use the code search function.
Step 1: Press Setup Key
The first step is to press the setup key mentioned previously until the remote’s LED is lit.
Step 2: Press the Power Button and Release it
If your remote has the auto code search function, you can press the power button and then release it to send codes to the TV. The remote will then flash 10 times as codes are being sent. If one of the codes is correct, the TV will turn off. Otherwise, you can press and release the power button again to try another series of codes.
Step 3: Find the Code
Now that your TV has turned off, it’s time to find the exact code that worked. Turn on your TV manually, and then press the volume-up button on your remote. This will send the first code in the series. By waiting a few seconds between each press, you can test out each code in the series until the TV turns off again. At this stage, press the setup key (or TV button) to store the code for use.
Programming Issues: Resolving the Problem
The best-case scenario is that you found a code that works, and you’re on your way to using your remote. However, with everything technical, sometimes things don’t go as planned. Not to worry, we’re going to troubleshoot the most common issues below so you can get your remote working.
- Signaling problem: Universal remotes have a built-in delay after input to account for TV compatibility. In addition, infrared remotes need to be pointing directly at the TV in order to work (most remotes use infrared). When you’re using your remote, make sure you point it at the TV until the TV responds, and don’t move away prematurely or swing the remote around too much.
- HDMI devices causing conflict: If you have lots of devices connected to your TV via HDMI, this can cause some unexpected issues. As HDMI devices are continuously giving instructions to each other, the signals from your remote can be disrupted. You can try going into the settings menu on your TV and switching off “HDMI CEC”. This will stop the issue from occurring.
- Incorrect usage: Before calling it quits, check the batteries in your remote, as this can be a simple solution. Most manufacturers ship remotes either with almost-dead batteries or none at all. Likewise, make sure you’re pressing the correct setup button and that the remote’s LED is lit up.
- Damaged components: This problem is a little less likely but very possible. If you can’t get either your remote or TV to respond whatsoever, there’s a chance that some of the hardware inside is damaged. There’s no way around this except by replacing the devices. Contact your device’s manufacturer to discuss your options.
The image featured at the top of this post is ©Stock-Asso/Shutterstock.com.
