Home

 › 

Articles

 › 

How To Update AirPods’ Firmware

airpods

How To Update AirPods’ Firmware

Airpods are one of the essential iPhone accessories that go with you everywhere. They let you answer calls and listen to music without taking your phone out of your pocket. While that’s great, AirPods has firmware that needs to be updated to offer 24/7 functionality, like every other wireless earphone. 

Knowing how to update AirPods’ firmware is essential to prevent them from misbehaving. If you don’t update your AirPods firmware for a long time, it could result in multiple bugs and errors and, even worse—full dysfunctioning. Therefore, it’s recommended to check whether your AirPods have software updates available.

Typically, firmware updates automatically, but if it doesn’t, you can do it manually too. Let’s go through a detailed step-by-step guide to learn how to update AirPods firmware correctly. 

Is It Important To Update Your AirPods’ Firmware?

Keeping your AirPods’ firmware updated is an excellent way to enjoy the best experience from your earphones. The primary purpose of firmware updates is to remove the bugs or errors affecting your AiPods’ performance. 

If you keep using the old version, you may face issues with volume, syncing, etc. Not only that, but updated firmware will also help you enjoy new features. 

Security is another crucial reason your firmware needs to be updated. With older firmware, your AirPods have a higher risk of being hijacked by someone, especially when the accessories are connected. Thus, updated firmware eliminates all such risks to offer you the most enjoyable and safe experience. 

Do AirPods Update Automatically?

Most of the time, AirPods update their firmware automatically, as long as you’re following the requirements. So you won’t have to keep checking your AirPods firmware or force update it. Those requirements include the following: 

Under all these conditions, your AirPods will update automatically without you knowing. This usually happens when you’re charging your AirPods. However, sometimes things may not be this easy, and you would have to update the firmware manually. 

How To Update AirPods Firmware Manually

Updating your AirPods firmware is easy. You have two ways to check your AirPods’ firmware, both of which we will discuss in the below steps:

Step 1: Bring Your AirPods Firmware Close To the iPhone

Bring your AirPods and iPhone together so they are within range.
Bring your AirPods and iPhone together so they are within range.

First, put your AirPods in their charging case and bring them within range of your iPhone. Next, open the lid and dismiss the battery notification on your phone. 

Step 2: Open the Settings

how to update airpods firmware image 2
The next step is to open the Settings app on your iPhone and tap on “General.”

Step 3: Go To About 

Now, tap on “About” to move further.
Now, tap on “About” to move further.

Step 4: Tap On Your AirPods’ Name To See Your Firmware’s Current Version

how to update airpods firmware image 4
Tap on your AirPods name to determine your current firmware.

In the “About” section, you’ll have to scroll your screen to the bottom to find your AirPods name. Tap on it. The following screen will show you the version of firmware installed on your AirPods. 

how to update airpods firmware image 5
Under About, you can find the firmware version.

Step 5: Check Your AirPods Firmware From the Bluetooth Menu (Alternate To Step 3)

how to update airpods firmware image 6
You are also able to check on firmware versions under your phone’s bluetooth settings.

Instead of digging into your iPhone’s “About” option, you can check your AirPods’ current firmware version from the Bluetooth Menu. Then, simply open Settings and tap on Bluetooth.

Step 6: Tap the “i” Button To View the Firmware Version

how to update airpods firmware image 7
Simply tab on the ”i” for the firmware information.

Find your AirPods’ name and tap on the “i” next to it. The next screen will show you the current version of your AirPods’ firmware.

Step 7: Install the Available Firmware Version 

how to update airpods firmware image 8
If a new firmware version happens to be available, download it.

If you see a new firmware version available, you can easily install it on your AirPods. Just place your AirPods in the charging case, connect them to a power source, and bring them close to your iPhone. Then, open the case’s lid and dismiss the on-screen battery pop-up. 

That’s it. You won’t see any notification on the iPhone’s screen related to the ongoing firmware update. Of course, this isn’t a good thing. You can know your AirPods’ firmware has been updated by leaving them for some time and then checking its current firmware version. It will most probably be updated to the newest version. 

Here is a brief, step-by-step video for further reference:

Note: Connecting the case to the charger won’t be necessary if it has enough battery power

How To Fix AirPods Pro Firmware Not Updating

Sometimes, the AirPods’ firmware won’t change or update, even if you follow all the above steps carefully. If you face a similar situation, don’t start sweating, and try the below methods to fix your AirPods’ firmware updating issue. 

Use the AirPods for Some Time

When updating your AirPods’ firmware, make sure the case’s lid is closed. If the lid stays open, your AirPods or AirPods Pro won’t update. If the update still doesn’t happen, you can try listening to music for a few minutes, then put them in the case and plug the charger in. It will probably fix the issue.

Charge Your Airpods

If your AirPods firmware is not updating, plug them into a charger and ensure they’re fully charged. AirPods usually don’t update on a low battery. You can begin updating them after at least 30 minutes of charging.

Bring the Airpods and Phone Within Range

Another reason your AirPods might show firmware errors is the distance between your phone and the earphones. If the distance is too much, you may not be able to update the AirPods’ firmware. So ensure both devices are within the range. 

Reset Airpods 

Resetting your AirPods is also an excellent way to update their firmware. It will remove all the software glitches and bugs from your AirPods. Here is how you can do so:

  1. Place your AirPods in their charging case and close its lid. 
  2. Then, wait for at least 30 seconds.
  3. Now, open the charging case’s lid.
  4. Next, unlock your iPhone or iPad, open the Settings option > Bluetooth > More Info > Select your AirPods.
  5. Tap on your AirPods’ name to forget them, and confirm it by tapping again.
  6. Finally, press and hold the Setup button on the case’s back for 15 seconds until its light turns amber and then completely white. Make sure that the case’s lid remains open at this step.

Reset Your iPhone or iPad

If resetting your AirPods didn’t work, you can try resetting your device, i.e., iPhone or iPad. Then, connect the device with the AirPods again and try updating the firmware. You can also use your iPod for this purpose. 

In case you fail to update your AirPods through the iPhone, try updating them from your iPad or IPod. This can also go vice versa. This trick has done wonders for many users and helped them update their AirPods’ firmware easily.

Conclusion

Like any wireless accessory, your AirPods need occasional maintenance to stay functional for a long time. This includes updating their firmware whenever you suspect any errors or bugs. Knowing how to update AirPods firmware also ensures flawless performance, helping you enjoy your favorite music in the safest way possible. Hopefully, the above steps will help you update your AirPods to the latest version.

Up Next

Frequently Asked Questions

How to update firmware on AirPods if you don't have an iPhone?

If you don’t have an iPhone, you can try updating the AirPods from your supported iPad or IPod. However, the device must be compatible with your AirPods and have a stable internet connection. Then, just connect your AirPods to your iPad or iPod, and follow the steps we mentioned above.

How to check your AirPods firmware version?

You can check your AirPods firmware version from any iOS device connected to them. Just remove the AirPods from its case, open the Settings app on your phone, tap General, go to About, scroll down, and tap your AirPods name. The next window will have the version mentioned.

Why do my AirPods keep malfunctioning?

Your AirPods may need to be fixed for multiple reasons. One of them is outdated firmware. You can update your AirPods’ firmware with any connected iOS device, such as iPod, iPad, or iPhone. Simply connect the AirPods to any of these devices, bring them in the device’s range, open the charging case’s lid, and dismiss the battery notification on your device’s screen. The AirPods will update automatically.

How to fix AirPods firmware not updating?

If your AirPods firmware is not updating, try charging the case and then connect with your iPhone to update. If it doesn’t work, listen to music for some time with the AirPods and then put them in the case and plug them in. You can also try resetting your AirPods or the device they’re connected to. Also, ensure the device and the AirPods are within range to update its firmware successfully.

How do I charge my AirPods while updating?

You can charge your AirPods during updating with the USB cable or Qi wireless charging. AirPods firmware updates quickly and flawlessly when connected to a power source, as they are not in saving mode.

To top