- The Ford Fusion Hybrid’s last production year was 2020, with 2019 and 2020 being fantastic vehicles you can purchase.
- The 2010 Ford Fusion Hybrid had major steering issues.
- The 2013 Ford Fusion Hybrid had engine leaks and other severe issues, leading to a recall.
- The 2017 Ford Fusion Hybrid had major electrical system problems.
- The 2018 Ford Fusion Hybrid had potential electrical difficulties, but they were much rarer compared to previous years.
What are the Ford Fusion Hybrid years to avoid? The Ford Fusion served as the family-sized sedan in Ford’s lineup for over a decade. While the car itself was retooled into a fantastic platform, there are some issues to be aware of when shopping second-hand.
The Fusion Hybrid’s last production year was 2020, with 2019 and 2020 being fantastic vehicles you can purchase. The rest of the lineup isn’t so lucky, as you’ll see throughout this guide. If you’re searching for a new hybrid, give these particular years a wide berth when shopping around.
2010 Ford Fusion Hybrid
The 2010 production year saw the introduction of the Hybrid to the Ford Fusion line as an option. As a hybrid, the Ford Fusion Hybrid doesn’t have any major complaints on its first outing on the retail market. It was certainly an economical choice to go for a full hybrid design on a sedan of this size.
What you’ll instead find for all Ford Fusion Hybrid models in this production year is steering issues. The first production years on offer had their own issues, but no Hybrid model. The 2010’s major issue was steering troubles as a whole.
As such, if you’re looking at a Ford Fusion Hybrid from this year, you’ll either want to give it a wide berth or take it to a reputable mechanic. The steering troubles for the Ford Fusion Hybrid would persist for the next few production years.
That said, the steering issues you do encounter are going to be the absolute worst with the 2010 production year. This will be a recurring theme with the Ford Fusion Hybrid as you’ll see. A new model run releases and the teething problems are recurrent until the final year of production for that revision.
2011 Ford Fusion Hybrid
The 2011 Ford Fusion Hybrid really didn’t see any major changes on the whole compared to the previous production year. Steering troubles still persist, although not at the same level as the 2010 model. Most users see issues start to arise with the 2011 Ford Fusion Hybrid coming in the form of issues with the interior materials and components.
We’re talking failure of simple electronics like windows, locks, and so forth with age. Steering is still a problem as stated, but it is not nearly as grievous as the issues seen with the 2010 production year.
If you find a 2011 Ford Fusion Hybrid for a deal, it might be worth purchasing. However, as a rule of thumb, take the time to let a reputable inspector or mechanic give the vehicle an exhaustive look. Some users will get the steering and interior components handled before selling the car.
That said, this isn’t a hard and fast rule, and will greatly vary depending on the individual vehicle for sale.
2012 Ford Fusion Hybrid
The 2012 production year was the last major release in the run from 2010 to 2012 and is the most refined of this revision. That said, you’ll still find the same issues plaguing 2012 as you would with 2011. There are still issues with the steering and interior components.
These issues aren’t nearly as aggravated as a whole as you would find with a 2010 model. They’re persistent, however. Most of them are minor fixes, though costly. As such, you can honestly just dodge the 2010 to 2012 production run unless you have a particular fondness for the body style.
This run of revisions sees its own share of teething problems. With that in mind, these are far more severe as a whole when compared to the 2010 to 2012 production run. 2013 Ford Fusions often see issues with engine leaks. This was a persistent and severe enough issue that Ford issued a recall for the affected model years.
What makes the engine leak such a hazard is the potential for a fire, making for a dangerous run of cars. There are also issues with the fuel system and lines as well as the transmission. 2013 Ford Fusion Hybrid vehicles can be a nightmare when it comes down to a pure cost perspective.
As such, you’ll want to completely avoid this run. Unless, of course, you have a reputable vehicle history and mechanic on hand to take a closer look at the vehicle. Even then, this might be too much of a gamble to risk your safety on.
Much like its immediate predecessor, the 2014 Ford Fusion production year has major issues. The aforementioned issues with engine leaks, the fuel system, and transmission all persist into 2014, albeit at a much lower rate.
As with 2013, you’ll want to give 2014 models a wider berth as a whole. While these problems were eventually addressed with future models, it is still a major concern. You’ll want to completely avoid 2013 and 2014 Ford Fusion Hybrid vehicles if you can absolutely help it.
That isn’t to say more mechanically-inclined customers should avoid it. If you have a good mechanic with a handle on fixing hybrid cars, it could be fine. 2014 vehicles still have major issues. As such, you might want to avoid this production year as a simple matter of safety.
2015 would see most issues ironed out for this production run. They’re still there, just not at the same rate of occurrence. As noted in 2013 and 2014, these are major issues. Electrical components are far easier to deal with than engine woes. Thus, you might end up just avoiding these vehicles as a whole.
The engine leak issue was mostly ironed out but was still an issue, although uncommon. I don’t know about you, but that isn’t a risk to take in any circumstance. Another thing to keep in mind is the simple age of this vehicle. You’re looking at a production vehicle nearing almost a full decade since it rolled off the line.
As such, finding one of these without problems in good condition might be a major task. It simply isn’t worth the headache of dealing with all potential issues when looking at 2015 production models.
This was the final year of the 2013 to 2016 production run, and most issues have been addressed. The engine leak and other issues might still be present but are far more unlikely. As noted in 2015, this is more of a gamble. Unless you’re just adamant about using a fixer-upper, it might be worth looking at a different production run entirely.
When they work, the Ford Fusion Hybrid line of vehicles is a comfortable and easy sedan to enjoy. That said, there are far more models to avoid than there are good buys.
This is an entirely new production run. It is also the last major run of Ford Fusion Hybrid vehicles as a whole. Shortly after the 2017 to 2020 production run, Ford would discontinue the Fusion as an option in their product lineup. As has been mentioned time and time again, the first years of any production run after their teething issues.
In 2017 models, these production issues were major but not as dangerous. 2017 Ford Fusion vehicles have a tendency to develop fairly severe electrical system problems. Now, diagnosing something with the engine is fairly simple for a mechanic. However, less knowledgeable users might have issues identifying electrical system problems.
If you want to avoid a headache, it is best to miss this production year entirely. There is simply too much of a risk of major electrical issues arising with this production year.
2018 is the last problem child of the Ford Fusion Hybrid models you’ll find. Even then, these aren’t that bad, at least compared to the previous year. There is still the potential for electrical difficulties as a whole. However, these are much rarer occurrences.
It is easier to think of the 2018 production year as one with the potential for issues. That said, you’re perfectly fine opting for the 2019 and 2020 production years. Those are the two final years of Ford Fusion production.
That said, if you’ve got a good resource on inspecting electrical systems in a car, 2018 might be a fine choice. To be on the safe side, 2019 and 2020 models are going to be your best bet as a whole.
Summary of Ford Fusion Hybrid Models to Avoid
|Steering, failure of simple electronics
|Steering, persistent problems with interior components
|Significant issues with engine leaks, problems with the fuel system, transmission complications
|Persistent issues with engine leaks, the fuel system, and the transmission
|Engine leaks, although less common
|Engine leaks, but becoming rarer
|Electrical system problems
|Potential for electrical difficulties
The image featured at the top of this post is ©Mr.choppers, CC BY-SA 3.0, via Wikimedia Commons.